5305-01-107-3538
Screw,Tapping
4 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| FF-S-107 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| FFS107TYPEASTYLES | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 5 | 9 |
| MS24615-26 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| MS51862-25C | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AASB | FASTENER LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| CRGF | NONMACHINE THREAD STYLE | GIMLET POINT (TYPE A, AB OR BA) |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CTYF | NONMACHINE NOMINAL THREAD DIAMETER | 0.164 INCHES |
| MATT | MATERIAL | STEEL COMP 410 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | AB TYPE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-01-107-3538
NSN 5305-01-107-3538 is a National Stock Number assigned to Screw,Tapping. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5305-01-107-3538, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.