5305-01-074-6843
Screw,Close Tolerance
Unit Price
$33.98
per PG
5 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| NAS1581A3R13 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 5 | 9 |
| NAS1581A3T13 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 5 | 9 |
| NAS1581F3T13 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| 5305PL0884111 | 9009H | Jednolity Indeks Materialowy - Uniform Material Index | 6 | 9 |
| 5305PL1803299 | 9009H | Jednolity Indeks Materialowy - Uniform Material Index | 6 | 9 |
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Jednolity Indeks Materialowy - Uniform Material Index
CAGE 9009H| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $33.98 | PG | 0 |
| 01-OCT-2025 | $33.98 | PG | 0 |
| 01-OCT-2025 | $33.98 | PG | 0 |
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.160 INCHES MINIMUM AND 1.190 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATT | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-01-074-6843
NSN 5305-01-074-6843 is a National Stock Number assigned to Screw,Close Tolerance. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 5 part numbers associated with this NSN from 2 manufacturers.
The current government unit price for NSN 5305-01-074-6843 is $33.98. Price history shows 3 recorded price changes.
To find the part number for NSN 5305-01-074-6843, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.