5305-00-983-7477
Screw,Cap,Socket Head
3 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 509440-1016 | 80020 | Naval Air Warfare Center Aircraft Division Joint Base Jbmdl | C | 1 |
| MS16997-168 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| 10489714 | A486G | Nimikkeistokeskus Ncb Finland | 6 | 9 |
Naval Air Warfare Center Aircraft Division Joint Base Jbmdl
CAGE 80020Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906Nimikkeistokeskus Ncb Finland
CAGE A486GDEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.758 INCHES MINIMUM AND 1.818 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.940 INCHES MINIMUM AND 2.000 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.921 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.625 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 11 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 130000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-00-983-7477
NSN 5305-00-983-7477 is a National Stock Number assigned to Screw,Cap,Socket Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5305-00-983-7477, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.