5305-00-978-9380
Screw,Cap,Socket Head
6 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| FF-S-86 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| MS16997-61 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| 213039-37 | D9182 | Zf Industrieantriebe Witten Gmbh | C | 1 |
| 6789 1/4X78 L0N G NC | D9182 | Zf Industrieantriebe Witten Gmbh | C | 1 |
| MS 16997-61 | D9182 | Zf Industrieantriebe Witten Gmbh | C | 1 |
| 5305009789380 | SCY13 | E.C.a Etablissement Centrald'Approvisionnement Des Forces Armee | 5 | 9 |
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906Zf Industrieantriebe Witten Gmbh
CAGE D9182E.C.a Etablissement Centrald'Approvisionnement Des Forces Armee
CAGE SCY13DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.744 INCHES MINIMUM AND 0.874 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 130000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
Zf Industrieantriebe Witten Gmbh
CAGE D9182
E.C.a Etablissement Centrald'Approvisionnement Des Forces Armee
CAGE SCY13
About NSN 5305-00-978-9380
NSN 5305-00-978-9380 is a National Stock Number assigned to Screw,Cap,Socket Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 6 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5305-00-978-9380, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.