5305-00-958-9953
Screw,Cap,Hexagon Head
7 parts / 6 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MS35291-244 | 05415 | Linde Lift Truck Corp. | 5 | 9 |
| 12418 | 30076 | Hyster-Yale Group, Inc. | 3 | 2 |
| MS35291-244 | 556A6 | Linde Material Handling North America Corporation | C | 1 |
| MS90725-244 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| FF-S-85 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| MS35297-244 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 5 | 2 |
| MS90725-244 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
Linde Lift Truck Corp.
CAGE 05415Hyster-Yale Group, Inc.
CAGE 30076Linde Material Handling North America Corporation
CAGE 556A6National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 2.250 INCHES MINIMUM AND 2.562 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 6.000 INCHES NOMINAL |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.591 INCHES MINIMUM AND 0.627 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 1.000 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 8 |
| CQBC | MINIMUM TENSILE STRENGTH | 110000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 22.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 78000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Linde Lift Truck Corp.
CAGE 05415
Hyster-Yale Group, Inc.
CAGE 30076
Linde Material Handling North America Corporation
CAGE 556A6
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 5305-00-958-9953
NSN 5305-00-958-9953 is a National Stock Number assigned to Screw,Cap,Hexagon Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 7 part numbers associated with this NSN from 6 manufacturers.
To find the part number for NSN 5305-00-958-9953, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.