5305-00-957-7570
Screw,Cap,Socket Head
Unit Price
$1.48
per EA
4 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MS24671-55 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| FF-S-86 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | C | 1 |
| 5305PL0972417 | 9009H | Jednolity Indeks Materialowy - Uniform Material Index | 6 | 9 |
| MS24671-55 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Jednolity Indeks Materialowy - Uniform Material Index
CAGE 9009HMilitary Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $1.48 | EA | 0 |
| 01-OCT-2025 | $1.48 | EA | 0 |
| 01-OCT-2025 | $1.48 | EA | 0 |
| 01-OCT-2025 | $1.48 | EA | 0 |
| 01-OCT-2025 | $1.48 | EA | 0 |
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.250 INCHES MINIMUM AND 1.375 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.750 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AGAV | END ITEM IDENTIFICATION | MRAP RG-33 |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.219 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 436.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Jednolity Indeks Materialowy - Uniform Material Index
CAGE 9009H
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 5305-00-957-7570
NSN 5305-00-957-7570 is a National Stock Number assigned to Screw,Cap,Socket Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 4 manufacturers.
The current government unit price for NSN 5305-00-957-7570 is $1.48. Price history shows 5 recorded price changes.
To find the part number for NSN 5305-00-957-7570, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.