5305-00-902-2130
Screw,Machine
Unit Price
$0.22
per EA
4 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MS24694-C10 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| 5305PL2057827 | 9009H | Jednolity Indeks Materialowy - Uniform Material Index | 6 | 9 |
| MS24694-C10 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
| MS24694-C10 | A0170 | Leonardo Spa Aeronautics Division - Pomigliano D'Arco Site | 5 | 2 |
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Jednolity Indeks Materialowy - Uniform Material Index
CAGE 9009HMilitary Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906Leonardo Spa Aeronautics Division - Pomigliano D'Arco Site
CAGE A0170| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $0.22 | EA | 0 |
| 01-OCT-2025 | $0.22 | EA | 0 |
| 01-OCT-2025 | $0.22 | EA | 0 |
| 01-OCT-2025 | $0.22 | EA | 0 |
| 01-OCT-2025 | $0.22 | EA | 0 |
| 01-OCT-2025 | $0.22 | EA | 0 |
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.406 INCHES MINIMUM AND 0.485 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.283 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 85000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205
Jednolity Indeks Materialowy - Uniform Material Index
CAGE 9009H
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
Leonardo Spa Aeronautics Division - Pomigliano D'Arco Site
CAGE A0170
About NSN 5305-00-902-2130
NSN 5305-00-902-2130 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 4 manufacturers.
The current government unit price for NSN 5305-00-902-2130 is $0.22. Price history shows 6 recorded price changes.
To find the part number for NSN 5305-00-902-2130, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.