5305-00-855-6304
Screw,Machine
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| FFS92 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | E | 8 |
| MS35266-20 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.833 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.875 INCHES NOMINAL |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.037 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 48 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| CYBG | HEAD HOLE CONFIGURATION STYLE | ROUND |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-00-855-6304
NSN 5305-00-855-6304 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5305-00-855-6304, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.