5305-00-801-4643
Screw,Machine
8 parts / 7 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 722-016-002 | 26055 | Parker-Hannifin Corporation Dba Pneutronics Div Fluid Systems Division | C | 1 |
| 723-002-103 | 26055 | Parker-Hannifin Corporation Dba Pneutronics Div Fluid Systems Division | 5 | 9 |
| 723-002-103 | 59211 | Parker-Hannifin Corporation Dba Service and Support Operation Div Services and Support Operations | 3 | 9 |
| NAS662C2-3 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 3 | 2 |
| FFS92TYPE1STYLE3S | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| 000-110-116 | 81590 | Korry Electronics Co | C | 1 |
| 112-0256-009 | 94756 | The Boeing Company Div Legacy Boeing Hb1 | C | 1 |
| 10125497 | A486G | Nimikkeistokeskus Ncb Finland | 6 | 9 |
Parker-Hannifin Corporation Dba Pneutronics Div Fluid Systems Division
CAGE 26055Parker-Hannifin Corporation Dba Service and Support Operation Div Services and Support Operations
CAGE 59211National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Korry Electronics Co
CAGE 81590The Boeing Company Div Legacy Boeing Hb1
CAGE 94756Nimikkeistokeskus Ncb Finland
CAGE A486GDEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.086 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 321 OR STEEL COMP 347 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Parker-Hannifin Corporation Dba Pneutronics Div Fluid Systems Division
CAGE 26055
Parker-Hannifin Corporation Dba Service and Support Operation Div Services and Support Operations
CAGE 59211
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Korry Electronics Co
CAGE 81590
The Boeing Company Div Legacy Boeing Hb1
CAGE 94756
Nimikkeistokeskus Ncb Finland
CAGE A486G
About NSN 5305-00-801-4643
NSN 5305-00-801-4643 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 8 part numbers associated with this NSN from 7 manufacturers.
To find the part number for NSN 5305-00-801-4643, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.