NSN
5305-00-765-3190
Setscrew
FSC 5305 — SCREWSFSG 53 — HARDWARE AND ABRASIVES
1 parts / 1 mfrs
Part Numbers for NSN 5305-00-765-31901 records
Manufacturers (1)
Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
CAGE 19200Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.140 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.141 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| AAUY | POINT LENGTH | 0.050 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AAVA | POINT DIAMETER | 0.093 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| ABQJ | POINT STYLE | CHAMFER DOG |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.125 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 44 |
| CWDK | POINT CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | POINT FINISHED TO 63 MICROINCHES |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Related NSNs in FSC 5305
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5305-00-765-3190
NIIN007653190
FSC5305
DEMILA
PARTS1
MFRS1
About NSN 5305-00-765-3190
NSN 5305-00-765-3190 is a National Stock Number assigned to Setscrew. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 1 part number associated with this NSN from 1 manufacturer.
To find the part number for NSN 5305-00-765-3190, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.