5305-00-708-7718
Screw,Machine
4 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 330-2086-000 | 57472 | All Manufacturers, Inc. Dba Allied Harbor Aerospace Fasteners | 5 | 1 |
| P330-2086-000 | 77250 | Allied Products Corp Pheoll Mfg Co Div | 5 | 9 |
| FFS92 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| MS18211-8C | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
All Manufacturers, Inc. Dba Allied Harbor Aerospace Fasteners
CAGE 57472Allied Products Corp Pheoll Mfg Co Div
CAGE 77250Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.507 INCHES MINIMUM AND 0.574 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.147 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.086 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | PLASTIC POLYHEXAMETHYLENE AMIDE |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-20693 COMP A TYPE 1 MIL SPEC SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 2C STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
All Manufacturers, Inc. Dba Allied Harbor Aerospace Fasteners
CAGE 57472
Allied Products Corp Pheoll Mfg Co Div
CAGE 77250
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 5305-00-708-7718
NSN 5305-00-708-7718 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5305-00-708-7718, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.