5305-00-655-9766
Screw,Cap,Socket Head
4 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| FFS86TYPE1STYLE11 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| MS35457-32 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MS35457-32 | D5589 | Feinmechanische Werke Mainz Gmbh | 5 | 9 |
| MS35457-32 | D9893 | Liebherr-Aerospace Lindenberg Gmbh | 5 | 2 |
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906Feinmechanische Werke Mainz Gmbh
CAGE D5589Liebherr-Aerospace Lindenberg Gmbh
CAGE D9893DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.375 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 0.375 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 140000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2 STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
Feinmechanische Werke Mainz Gmbh
CAGE D5589
Liebherr-Aerospace Lindenberg Gmbh
CAGE D9893
About NSN 5305-00-655-9766
NSN 5305-00-655-9766 is a National Stock Number assigned to Screw,Cap,Socket Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5305-00-655-9766, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.