5305-00-577-5453
Screw,Cap,Hexagon Head
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| FFS85AMEND2TYPE2STYLE10PGRADE5 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| MS35299-187 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 2.000 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.000 INCHES NOMINAL |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 10 |
| CQBC | MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 85000 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PHOSPHATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-00-577-5453
NSN 5305-00-577-5453 is a National Stock Number assigned to Screw,Cap,Hexagon Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5305-00-577-5453, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.