5305-00-514-9207
Screw,Machine
4 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 0457-226 | 02769 | Lockheed Martin Corporation Div Rms | 5 | 1 |
| 0457-226 | 56232 | Lockheed Martin Corporation Div Rms - Mitchel Field | 5 | 9 |
| FFS92TYPE1STYLE5S | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| MS35275-30 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Lockheed Martin Corporation Div Rms
CAGE 02769Lockheed Martin Corporation Div Rms - Mitchel Field
CAGE 56232Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.500 INCHES NOMINAL |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.046 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| CYBG | HEAD HOLE CONFIGURATION STYLE | ROUND |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Lockheed Martin Corporation Div Rms
CAGE 02769
Lockheed Martin Corporation Div Rms - Mitchel Field
CAGE 56232
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 5305-00-514-9207
NSN 5305-00-514-9207 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5305-00-514-9207, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.