NSN
5305-00-331-8032
Screw,Cap,Hexagon Head
FSC 5305 — SCREWSFSG 53 — HARDWARE AND ABRASIVES
2 parts / 2 mfrs
Part Numbers for NSN 5305-00-331-80322 records
Manufacturers (2)
General Motors Corp
CAGE 24617Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.4280 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALLUNABLE TO DECODE |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Related NSNs in FSC 5305
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5305-00-331-8032
NIIN003318032
FSC5305
DEMILA
PARTS2
MFRS2
Manufacturers
About NSN 5305-00-331-8032
NSN 5305-00-331-8032 is a National Stock Number assigned to Screw,Cap,Hexagon Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5305-00-331-8032, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.