5305-00-282-2289
Screw,Machine
7 parts / 6 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 905275-9 | 05257 | General Dynamics Land Systems - Canadacorporation Div General Dynamics Mission Systems | 5 | 2 |
| 5007-119 | 26344 | New Haven Mfg Corp | 5 | 9 |
| 0410-093 | 56232 | Lockheed Martin Corporation Div Rms - Mitchel Field | 5 | 1 |
| AN505C2-2 | 76301 | The Boeing Company Div Defense | 5 | 9 |
| FFS92ANDTYPE1ANDSTYLE2S | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| AN505C2-2 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 5 | 2 |
| AN505C2-3 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
General Dynamics Land Systems - Canadacorporation Div General Dynamics Mission Systems
CAGE 05257New Haven Mfg Corp
CAGE 26344Lockheed Martin Corporation Div Rms - Mitchel Field
CAGE 56232The Boeing Company Div Defense
CAGE 76301Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
A
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.086 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-18732 MIL SPEC 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR MIL-S-7720 MIL SPEC 4TH MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
General Dynamics Land Systems - Canadacorporation Div General Dynamics Mission Systems
CAGE 05257
New Haven Mfg Corp
CAGE 26344
Lockheed Martin Corporation Div Rms - Mitchel Field
CAGE 56232
The Boeing Company Div Defense
CAGE 76301
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
About NSN 5305-00-282-2289
NSN 5305-00-282-2289 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 7 part numbers associated with this NSN from 6 manufacturers.
To find the part number for NSN 5305-00-282-2289, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.