5305-00-273-6482
Screw,Cap,Socket Head
10 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 12Z1195-22 | 10001 | Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier | 5 | 9 |
| 272065PC1 | 10001 | Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier | 5 | 9 |
| 401746PC7 | 10001 | Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier | 5 | 9 |
| 481759PC7 | 10001 | Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier | 5 | 9 |
| 12Z1195-22 | 30003 | Naval Air Systems Command Managed Original Design Activity Not Material/Parts Supplier | 5 | 1 |
| 272065PC1 | 30003 | Naval Air Systems Command Managed Original Design Activity Not Material/Parts Supplier | 5 | 1 |
| 401746PC7 | 30003 | Naval Air Systems Command Managed Original Design Activity Not Material/Parts Supplier | 5 | 1 |
| 481759PC7 | 30003 | Naval Air Systems Command Managed Original Design Activity Not Material/Parts Supplier | 5 | 1 |
| MS24676-23 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| 0641-1024-8P | 99167 | Hamilton Sundstrand Corporation | 5 | 1 |
Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier
CAGE 10001Naval Air Systems Command Managed Original Design Activity Not Material/Parts Supplier
CAGE 30003Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906Hamilton Sundstrand Corporation
CAGE 99167DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.500 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.500 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.046 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 130000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| MATT | MATERIAL | STEEL OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier
CAGE 10001
Naval Air Systems Command Managed Original Design Activity Not Material/Parts Supplier
CAGE 30003
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
Hamilton Sundstrand Corporation
CAGE 99167
About NSN 5305-00-273-6482
NSN 5305-00-273-6482 is a National Stock Number assigned to Screw,Cap,Socket Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 10 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5305-00-273-6482, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.