NSN
5305-00-273-5014
Screw,Cap,Socket Head
FSC 5305 — SCREWSFSG 53 — HARDWARE AND ABRASIVES
1 parts / 1 mfrs
Part Numbers for NSN 5305-00-273-50141 records
Manufacturers (1)
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.500 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 0.500 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT CHAMFER |
| AASL | HEAD DIAMETER | 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| CQHQ | MINIMUM YIELD STRENGTH | 130000 POUNDS PER SQUARE INCH |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES BEARING SURFACE OF HEAD |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
Related NSNs in FSC 5305
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5305-00-273-5014
NIIN002735014
FSC5305
DEMILA
PARTS1
MFRS1
Manufacturers
About NSN 5305-00-273-5014
NSN 5305-00-273-5014 is a National Stock Number assigned to Screw,Cap,Socket Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 1 part number associated with this NSN from 1 manufacturer.
To find the part number for NSN 5305-00-273-5014, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.