5305-00-271-3564
Screw,Machine
4 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 152X1-4 | 00781 | Cessna Aircraft Co Arc Avionics Div | 5 | 9 |
| FFS92TYPE1STYLE2 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| AN505B2-4 | 81352 | Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group | 5 | 1 |
| AN505B2-4 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
Cessna Aircraft Co Arc Avionics Div
CAGE 00781Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group
CAGE 81352Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.214 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.150 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.086 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | COPPER ALLOY |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-00-271-3564
NSN 5305-00-271-3564 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 5305-00-271-3564, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.