5305-00-151-3369
Screw,Machine
6 parts / 6 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 55D32 | 0AHP5 | Curtiss-Wright Controls, Inc. Div Actuation Division | 5 | 1 |
| 6286 | 0B6S1 | International Business Machines Corp Parts Order Center Dept E - 54 | 5 | 1 |
| 6286 | 30874 | International Business Machines Corporation Dba Ibm | 5 | 9 |
| FFS92TYPE1STYLE2S | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| AN510-10-16 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
| 6286 | 88360 | International Business Machines Corp Endicott Development Lab | 5 | 9 |
Curtiss-Wright Controls, Inc. Div Actuation Division
CAGE 0AHP5International Business Machines Corp Parts Order Center Dept E - 54
CAGE 0B6S1International Business Machines Corporation Dba Ibm
CAGE 30874Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044International Business Machines Corp Endicott Development Lab
CAGE 88360DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.884 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 1.000 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2S STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Curtiss-Wright Controls, Inc. Div Actuation Division
CAGE 0AHP5
International Business Machines Corp Parts Order Center Dept E - 54
CAGE 0B6S1
International Business Machines Corporation Dba Ibm
CAGE 30874
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
International Business Machines Corp Endicott Development Lab
CAGE 88360
About NSN 5305-00-151-3369
NSN 5305-00-151-3369 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 6 part numbers associated with this NSN from 6 manufacturers.
To find the part number for NSN 5305-00-151-3369, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.