5305-00-151-3249
Screw,Machine
10 parts / 7 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 1087510-10-8 | 18355 | The Boeing Company | 5 | 9 |
| S1087510-10-8 | 18355 | The Boeing Company | 5 | 9 |
| 7602560 | 19200 | Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate | 5 | 1 |
| 7S5-10-8 | 43999 | The Boeing Company Div Legacy Am&M | 5 | 1 |
| B1289-10-8 | 43999 | The Boeing Company Div Legacy Am&M | 5 | 1 |
| 6700-636385-559 | 80049 | Department of the Air Force | 5 | 9 |
| FFS92ANDTYPE3ANDSTYLE3 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| AN507-1032R8 | 81352 | Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group | 2 | 2 |
| 1087510-10-8 | 88277 | The Boeing Company | 5 | 1 |
| S1087510-10-8 | 88277 | The Boeing Company | 5 | 1 |
The Boeing Company
CAGE 18355Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
CAGE 19200The Boeing Company Div Legacy Am&M
CAGE 43999Department of the Air Force
CAGE 80049Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group
CAGE 81352The Boeing Company
CAGE 88277DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.438 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 2330 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 3C STYLE |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY MATL,MIN TENSILE STRENGTH AND HARDNESS RATING |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
The Boeing Company
CAGE 18355
Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
CAGE 19200
The Boeing Company Div Legacy Am&M
CAGE 43999
Department of the Air Force
CAGE 80049
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group
CAGE 81352
The Boeing Company
CAGE 88277
About NSN 5305-00-151-3249
NSN 5305-00-151-3249 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 10 part numbers associated with this NSN from 7 manufacturers.
To find the part number for NSN 5305-00-151-3249, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.