5305-00-151-2933
Screw,Machine
3 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| FFS92 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| AN5001020 | 81352 | Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group | 5 | 1 |
| AN500-10-20 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group
CAGE 81352Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-00-151-2933
NSN 5305-00-151-2933 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5305-00-151-2933, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.