5305-00-151-2523
Screw,Machine
4 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 8812829 | 19203 | Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament | 5 | 1 |
| MILS7839 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| AN509-10R11 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
| AN509-10R11REV2 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 5 | 1 |
Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament
CAGE 19203Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.468 INCHES MINIMUM AND 0.484 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.703 INCHES MINIMUM AND 0.749 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.327 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Us Army Research, Development and Engineering Command Armament
CAGE 19203
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
About NSN 5305-00-151-2523
NSN 5305-00-151-2523 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5305-00-151-2523, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.