NSN
5305-00-151-2405
Screw,Machine
FSC 5305 — SCREWSFSG 53 — HARDWARE AND ABRASIVES
2 parts / 1 mfrs
Part Numbers for NSN 5305-00-151-24052 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| AN509-10R38 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
| AN509-10R38REV2 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 5 | 1 |
Manufacturers (1)
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.438 INCHES MINIMUM AND 0.484 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.390 INCHES MINIMUM AND 2.437 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.327 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.189 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Related NSNs in FSC 5305
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5305-00-151-2405
NIIN001512405
FSC5305
DEMILA
PARTS2
MFRS1
About NSN 5305-00-151-2405
NSN 5305-00-151-2405 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5305-00-151-2405, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.