5305-00-151-1852
Screw,Machine
7 parts / 7 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 20506-84 | 19315 | Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems | 5 | 9 |
| 20506-84 | 64547 | Honeywell International, Inc Div Aerospace-Tucson | 5 | 1 |
| 12X28 | 70188 | Franklin Engine Co Inc | 5 | 9 |
| FFS92ANDTYPE1ANDSTYLE4S | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| 20506-84 | 83298 | Allied Signal Inc Aerospace Equipment Systems Eatontown Site | 5 | 9 |
| AC500-416-6 | 88041 | Air Corps Standards Under Custodianiship of the Air Force | 5 | 1 |
| AN500-416-6 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems
CAGE 19315Honeywell International, Inc Div Aerospace-Tucson
CAGE 64547Franklin Engine Co Inc
CAGE 70188Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Allied Signal Inc Aerospace Equipment Systems Eatontown Site
CAGE 83298Air Corps Standards Under Custodianiship of the Air Force
CAGE 88041Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 4S STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems
CAGE 19315
Honeywell International, Inc Div Aerospace-Tucson
CAGE 64547
Franklin Engine Co Inc
CAGE 70188
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Allied Signal Inc Aerospace Equipment Systems Eatontown Site
CAGE 83298
Air Corps Standards Under Custodianiship of the Air Force
CAGE 88041
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
About NSN 5305-00-151-1852
NSN 5305-00-151-1852 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 7 part numbers associated with this NSN from 7 manufacturers.
To find the part number for NSN 5305-00-151-1852, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.