5305-00-151-1228
Screw,Machine
7 parts / 7 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| S422-6-5 | 14170 | Hughes Missile Systems Co San Diego | 5 | 9 |
| 1027301-6-5 | 18355 | The Boeing Company | 5 | 9 |
| 1177-6-5 | 80020 | Naval Air Warfare Center Aircraft Division Joint Base Jbmdl | 3 | 2 |
| FFS92 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| AN515-6R5 | 81352 | Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group | 5 | 2 |
| AN515-6R5 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 4 | 1 |
| 1027301-6-5 | 88277 | The Boeing Company | 3 | 2 |
Hughes Missile Systems Co San Diego
CAGE 14170The Boeing Company
CAGE 18355Naval Air Warfare Center Aircraft Division Joint Base Jbmdl
CAGE 80020Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group
CAGE 81352Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044The Boeing Company
CAGE 88277DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AASK | HEAD STYLE | ROUND |
| AASL | HEAD DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.103 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-671 FED SPEC SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 1C STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Hughes Missile Systems Co San Diego
CAGE 14170
The Boeing Company
CAGE 18355
Naval Air Warfare Center Aircraft Division Joint Base Jbmdl
CAGE 80020
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group
CAGE 81352
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
The Boeing Company
CAGE 88277
About NSN 5305-00-151-1228
NSN 5305-00-151-1228 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 7 part numbers associated with this NSN from 7 manufacturers.
To find the part number for NSN 5305-00-151-1228, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.