NSN
5305-00-151-1047
Screw,Machine
FSC 5305 — SCREWSFSG 53 — HARDWARE AND ABRASIVES
2 parts / 1 mfrs
Part Numbers for NSN 5305-00-151-10472 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| AN505-516-14 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
| AN510-516-14 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 4 | 1 |
Manufacturers (1)
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.653 INCHES MINIMUM AND 0.684 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.581 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Related NSNs in FSC 5305
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5305-00-151-1047
NIIN001511047
FSC5305
DEMILA
PARTS2
MFRS1
About NSN 5305-00-151-1047
NSN 5305-00-151-1047 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 1 manufacturer.
To find the part number for NSN 5305-00-151-1047, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.