5305-00-151-1035
Screw,Machine
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| FFS92ANDTYPE1ANDSTYLE2S | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| AN505B840 | 81352 | Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group | 2 | 2 |
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group
CAGE 81352DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.750 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 2.406 INCHES MINIMUM AND 2.500 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.300 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | COPPER ALLOY |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | I TYPE AND 2S STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-00-151-1035
NSN 5305-00-151-1035 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5305-00-151-1035, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.