5305-00-151-0398
Screw,Machine
5 parts / 5 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| FFS92 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| AN500A4-5 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
| 10196104 | A486G | Nimikkeistokeskus Ncb Finland | 6 | 9 |
| 24849-003 | D9853 | Rockwell Collins Deutschland Gmbh Div Rockwell Collins International & Service Solutions | 5 | 2 |
| 861839 | K6214 | Kearsley Airways Ltd | 5 | 2 |
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044Nimikkeistokeskus Ncb Finland
CAGE A486GRockwell Collins Deutschland Gmbh Div Rockwell Collins International & Service Solutions
CAGE D9853Kearsley Airways Ltd
CAGE K6214DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.037 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL OR STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| CYBG | HEAD HOLE CONFIGURATION STYLE | ROUND |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
Nimikkeistokeskus Ncb Finland
CAGE A486G
Rockwell Collins Deutschland Gmbh Div Rockwell Collins International & Service Solutions
CAGE D9853
Kearsley Airways Ltd
CAGE K6214
About NSN 5305-00-151-0398
NSN 5305-00-151-0398 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 5 part numbers associated with this NSN from 5 manufacturers.
To find the part number for NSN 5305-00-151-0398, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.