5305-00-151-0370
Screw,Machine
8 parts / 8 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 92612-14 | 19315 | Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems | 5 | 9 |
| 446-19 | 45934 | Ontic Engineering & Manufacturing, Inc Dba Ontic Us | 5 | 1 |
| 446-19 | 56705 | Donallco Inc | 5 | 9 |
| 92612-14 | 64547 | Honeywell International, Inc Div Aerospace-Tucson | 5 | 1 |
| 92612-14 | 83298 | Allied Signal Inc Aerospace Equipment Systems Eatontown Site | 5 | 9 |
| AC500A8-14 | 88041 | Air Corps Standards Under Custodianiship of the Air Force | 5 | 1 |
| AN500A8-14 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
| 503-4-04181-059 | K2523 | Eaton Limited | 5 | 2 |
Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems
CAGE 19315Ontic Engineering & Manufacturing, Inc Dba Ontic Us
CAGE 45934Donallco Inc
CAGE 56705Honeywell International, Inc Div Aerospace-Tucson
CAGE 64547Allied Signal Inc Aerospace Equipment Systems Eatontown Site
CAGE 83298Air Corps Standards Under Custodianiship of the Air Force
CAGE 88041Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044Eaton Limited
CAGE K2523DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AASK | HEAD STYLE | FILLISTER |
| AASL | HEAD DIAMETER | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.106 INCHES MINIMUM AND 0.113 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.047 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| ASXK | HOLE QUANTITY | 1 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| CYBG | HEAD HOLE CONFIGURATION STYLE | ROUND |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 5S STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems
CAGE 19315
Ontic Engineering & Manufacturing, Inc Dba Ontic Us
CAGE 45934
Donallco Inc
CAGE 56705
Honeywell International, Inc Div Aerospace-Tucson
CAGE 64547
Allied Signal Inc Aerospace Equipment Systems Eatontown Site
CAGE 83298
Air Corps Standards Under Custodianiship of the Air Force
CAGE 88041
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
Eaton Limited
CAGE K2523
About NSN 5305-00-151-0370
NSN 5305-00-151-0370 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 8 part numbers associated with this NSN from 8 manufacturers.
To find the part number for NSN 5305-00-151-0370, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.