NSN
5305-00-151-0106
Screw,Machine
FSC 5305 — SCREWSFSG 53 — HARDWARE AND ABRASIVES
2 parts / 2 mfrs
Part Numbers for NSN 5305-00-151-01062 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| AN509-516R20 | 81352 | Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group | 5 | 1 |
| AN509-516R20 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
Manufacturers (2)
Air Force-Navy Aeronautical Specifications Promulgated By Aeronautical Standards Group
CAGE 81352Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044Identification Data
DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.547 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.281 INCHES MINIMUM AND 1.328 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.569 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Related NSNs in FSC 5305
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN5305-00-151-0106
NIIN001510106
FSC5305
DEMILA
PARTS2
MFRS2
Manufacturers
About NSN 5305-00-151-0106
NSN 5305-00-151-0106 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5305-00-151-0106, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.