5305-00-150-9506
Screw,Machine
5 parts / 5 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| S422B6-12 | 14170 | Hughes Missile Systems Co San Diego | 5 | 9 |
| 7S4B6P12 | 43999 | The Boeing Company Div Legacy Am&M | 5 | 1 |
| 1177B6-12 | 80020 | Naval Air Warfare Center Aircraft Division Joint Base Jbmdl | 5 | 1 |
| FFS92ANDTYPE3STYLE1C | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| AN515B6R12 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 2 | 2 |
Hughes Missile Systems Co San Diego
CAGE 14170The Boeing Company Div Legacy Am&M
CAGE 43999Naval Air Warfare Center Aircraft Division Joint Base Jbmdl
CAGE 80020Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.750 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 0.750 INCHES NOMINAL |
| AASK | HEAD STYLE | ROUND |
| AASL | HEAD DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.103 INCHES NOMINAL |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | COPPER ALLOY |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Hughes Missile Systems Co San Diego
CAGE 14170
The Boeing Company Div Legacy Am&M
CAGE 43999
Naval Air Warfare Center Aircraft Division Joint Base Jbmdl
CAGE 80020
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
About NSN 5305-00-150-9506
NSN 5305-00-150-9506 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 5 part numbers associated with this NSN from 5 manufacturers.
To find the part number for NSN 5305-00-150-9506, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.