5305-00-113-9358
Screw,Machine
3 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 11011112-38 | 19200 | Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate | C | 1 |
| 11011112-38 | 19205 | Springfield Armory | 3 | 9 |
| 5305001139358 | A00AM | E.C.a Etablissement Central Des Approvisionnements Des Forces Armees Royales | 6 | 9 |
Combat Capabilities Development Command (Ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
CAGE 19200Springfield Armory
CAGE 19205E.C.a Etablissement Central Des Approvisionnements Des Forces Armees Royales
CAGE A00AMDEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.360 INCHES MINIMUM AND 0.452 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM |
| AASK | HEAD STYLE | ROUND EXTENDED WASHER |
| AASL | HEAD DIAMETER | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM |
| AATC | EXTENDED WASHER DIAMETER | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.028 INCHES MINIMUM AND 0.033 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 8630 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-00-113-9358
NSN 5305-00-113-9358 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5305-00-113-9358, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.