5305-00-059-7665
Screw,Machine
4 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| JBC01-061 | 80103 | Veeco Instruments Inc Lambda Div | 3 | 9 |
| FFS92 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| H795220406 | 88818 | Kearfott Corporation Div Guidance and Navigation Division | 3 | 2 |
| H795220407 | 88818 | Kearfott Corporation Div Guidance and Navigation Division | 3 | 2 |
Veeco Instruments Inc Lambda Div
CAGE 80103Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Kearfott Corporation Div Guidance and Navigation Division
CAGE 88818DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.375 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 0.375 INCHES NOMINAL |
| AASK | HEAD STYLE | PAN NO. 2 |
| AASL | HEAD DIAMETER | 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE |
| CYBH | BEARING SURFACE OF HEAD SURFACE FINISH | 125.0 MICROINCHES |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 9C STYLE AND 1 DESIGN |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-00-059-7665
NSN 5305-00-059-7665 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 4 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5305-00-059-7665, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.