5305-00-054-4374
Screw,Machine
11 parts / 10 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 544374 | 00000 | Ordnance Corps | 5 | 9 |
| 4-00523-314 | 03848 | Arma Div Ambac Industries Inc | 3 | 9 |
| 714595-224 | 06424 | Alliant Techsystems Operations Llc Div Defense Electronic Systems | 3 | 2 |
| 26356 | 06650 | Bell and Howell Phillipsburg Co Corporate Offices | 5 | 9 |
| 426528PC865 | 10001 | Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier | 3 | 2 |
| 687776 | 10001 | Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier | 3 | 2 |
| 714595-224 | 56232 | Lockheed Martin Corporation Div Rms - Mitchel Field | 3 | 2 |
| 12442 | 57733 | Stewart-Warner Corporation | 3 | 2 |
| ASAB18-6-1947 | 80204 | American National Standards Institute Incorporated Dba American National Standards Institute | 3 | 1 |
| FFS92TYPE1STYLE8S | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| P61265616 | 99872 | Entron Industries Limited Partnership Dba Entron Industries Property Div | 3 | 2 |
Ordnance Corps
CAGE 00000Arma Div Ambac Industries Inc
CAGE 03848Alliant Techsystems Operations Llc Div Defense Electronic Systems
CAGE 06424Bell and Howell Phillipsburg Co Corporate Offices
CAGE 06650Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier
CAGE 10001Lockheed Martin Corporation Div Rms - Mitchel Field
CAGE 56232Stewart-Warner Corporation
CAGE 57733American National Standards Institute Incorporated Dba American National Standards Institute
CAGE 80204Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Entron Industries Limited Partnership Dba Entron Industries Property Div
CAGE 99872DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.375 INCHES NOMINAL |
| AASK | HEAD STYLE | BINDING |
| AASL | HEAD DIAMETER | 0.275 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.071 INCHES MINIMUM AND 0.087 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | PASSIVATE |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 8S STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Ordnance Corps
CAGE 00000
Arma Div Ambac Industries Inc
CAGE 03848
Alliant Techsystems Operations Llc Div Defense Electronic Systems
CAGE 06424
Bell and Howell Phillipsburg Co Corporate Offices
CAGE 06650
Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier
CAGE 10001
Lockheed Martin Corporation Div Rms - Mitchel Field
CAGE 56232
Stewart-Warner Corporation
CAGE 57733
American National Standards Institute Incorporated Dba American National Standards Institute
CAGE 80204
About NSN 5305-00-054-4374
NSN 5305-00-054-4374 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 11 part numbers associated with this NSN from 10 manufacturers.
To find the part number for NSN 5305-00-054-4374, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.