5305-00-042-0671
Screw,Machine
7 parts / 6 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 420620 | 19204 | Army, United States Department of the Dba Rock Island Arsenal Jmtc | 5 | 9 |
| 420671 | 19204 | Army, United States Department of the Dba Rock Island Arsenal Jmtc | 5 | 9 |
| 420671 | 24617 | General Motors Corp | 3 | 9 |
| 6817B1/4-28X5/16 | 39428 | Mcmaster-Carr Supply Co | 5 | 2 |
| 420671 | 7X677 | General Motors Llc Dba General Motors Llc | C | 1 |
| FF-S-92 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| MS35238-86 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
Army, United States Department of the Dba Rock Island Arsenal Jmtc
CAGE 19204General Motors Corp
CAGE 24617Mcmaster-Carr Supply Co
CAGE 39428General Motors Llc Dba General Motors Llc
CAGE 7X677Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.204 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.312 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AASL | HEAD DIAMETER | 0.477 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.086 INCHES MINIMUM AND 0.108 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC ALL MATERIAL RESPONSES |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM OR ZINC |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | 81348-FF-S-92 GOVERNMENT SPECIFICATION AND 96906-MS35238/CANCELED/ GOVERNMENT STANDARD |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2S STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Army, United States Department of the Dba Rock Island Arsenal Jmtc
CAGE 19204
General Motors Corp
CAGE 24617
Mcmaster-Carr Supply Co
CAGE 39428
General Motors Llc Dba General Motors Llc
CAGE 7X677
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 5305-00-042-0671
NSN 5305-00-042-0671 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 7 part numbers associated with this NSN from 6 manufacturers.
To find the part number for NSN 5305-00-042-0671, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.