5305-00-018-0207
Screw,Cap,Hexagon Head
6 parts / 6 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 180207 | 21450 | Army Weapons Command Attn Amswe-Ree-S | 5 | 1 |
| 180207 | 24617 | General Motors Corp | 5 | 1 |
| 4AX249 | 76040 | Mack Trucks Inc Parts Opn | 5 | 1 |
| NASM90725 | 80205 | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use | 5 | 1 |
| FFS85TYPE2STYLE10PGRADE5 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| MS35297-138 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Army Weapons Command Attn Amswe-Ree-S
CAGE 21450General Motors Corp
CAGE 24617Mack Trucks Inc Parts Opn
CAGE 76040National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.375 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 1.500 INCHES NOMINAL |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.348 INCHES MINIMUM AND 0.371 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.798 INCHES MINIMUM AND 0.813 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.562 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBC | MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE AND 5 GRADE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Army Weapons Command Attn Amswe-Ree-S
CAGE 21450
General Motors Corp
CAGE 24617
Mack Trucks Inc Parts Opn
CAGE 76040
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 5305-00-018-0207
NSN 5305-00-018-0207 is a National Stock Number assigned to Screw,Cap,Hexagon Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 6 part numbers associated with this NSN from 6 manufacturers.
To find the part number for NSN 5305-00-018-0207, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.