5305-00-017-9796
Screw,Cap,Hexagon Head
7 parts / 6 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 179796 | 24617 | General Motors Corp | 5 | 1 |
| 0912327 | 6N299 | Agco Corp Parts Opn | 5 | 2 |
| 179796 | 72582 | Rolls-Royce Solutions America Inc | 5 | 1 |
| FFS85TYPE2STYLE10P | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| 0912327-4 | 92392 | Allis-Chalmers Corp | 5 | 9 |
| 912327 | 92392 | Allis-Chalmers Corp | 5 | 9 |
| MS35295-7 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
General Motors Corp
CAGE 24617Agco Corp Parts Opn
CAGE 6N299Rolls-Royce Solutions America Inc
CAGE 72582Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Allis-Chalmers Corp
CAGE 92392Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.750 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 0.875 INCHES NOMINAL |
| AASK | HEAD STYLE | HEXAGON |
| AASU | HEAD HEIGHT | 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
General Motors Corp
CAGE 24617
Agco Corp Parts Opn
CAGE 6N299
Rolls-Royce Solutions America Inc
CAGE 72582
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Allis-Chalmers Corp
CAGE 92392
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 5305-00-017-9796
NSN 5305-00-017-9796 is a National Stock Number assigned to Screw,Cap,Hexagon Head. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 7 part numbers associated with this NSN from 6 manufacturers.
To find the part number for NSN 5305-00-017-9796, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.