5305-00-013-3573
Screw,Machine
5 parts / 5 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 133573 | 12204 | Chrysler Realty Company Llc Dba Daimler Chrysler | 5 | 1 |
| 133573 | 21450 | Army Weapons Command Attn Amswe-Ree-S | 5 | 1 |
| 133573 | 24617 | General Motors Corp | 5 | 1 |
| FFS92TYPE1STYLE2S | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| MS35241-73 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Chrysler Realty Company Llc Dba Daimler Chrysler
CAGE 12204Army Weapons Command Attn Amswe-Ree-S
CAGE 21450General Motors Corp
CAGE 24617Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC ALL MATERIAL RESPONSES |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL C FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | I TYPE AND 2S STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Chrysler Realty Company Llc Dba Daimler Chrysler
CAGE 12204
Army Weapons Command Attn Amswe-Ree-S
CAGE 21450
General Motors Corp
CAGE 24617
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 5305-00-013-3573
NSN 5305-00-013-3573 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 5 part numbers associated with this NSN from 5 manufacturers.
To find the part number for NSN 5305-00-013-3573, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.