5305-00-013-3486
Screw,Machine
7 parts / 5 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| BCKX1FF1 | 00000 | Ordnance Corps | 5 | 9 |
| 133486 | 12204 | Chrysler Realty Company Llc Dba Daimler Chrysler | 5 | 1 |
| 24622S7 | 23040 | Ford Motor Co Ford Parts and Service Div Government Part Sales | 5 | 9 |
| 24622S7S8 | 23040 | Ford Motor Co Ford Parts and Service Div Government Part Sales | 5 | 9 |
| 35988S7S8 | 23040 | Ford Motor Co Ford Parts and Service Div Government Part Sales | 5 | 9 |
| 100-3S8-7 | 80063 | Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir | 5 | 1 |
| MS35241-51 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Ordnance Corps
CAGE 00000Chrysler Realty Company Llc Dba Daimler Chrysler
CAGE 12204Ford Motor Co Ford Parts and Service Div Government Part Sales
CAGE 23040Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
CAGE 80063Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC ALL MATERIAL RESPONSES |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL C FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | I TYPE AND 2S TYPE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Ordnance Corps
CAGE 00000
Chrysler Realty Company Llc Dba Daimler Chrysler
CAGE 12204
Ford Motor Co Ford Parts and Service Div Government Part Sales
CAGE 23040
Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
CAGE 80063
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 5305-00-013-3486
NSN 5305-00-013-3486 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 7 part numbers associated with this NSN from 5 manufacturers.
To find the part number for NSN 5305-00-013-3486, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.