5305-00-013-3418
Screw,Machine
8 parts / 8 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 133418 | 16764 | General Motors Corp Delco Remy Div | 5 | 9 |
| 20507-7 | 19315 | Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems | 5 | 9 |
| 133418 | 24617 | General Motors Corp | 5 | 1 |
| 328-4 | 45934 | Ontic Engineering & Manufacturing, Inc Dba Ontic Us | 5 | 1 |
| 328-4 | 56705 | Donallco Inc | 5 | 9 |
| AN505-6-5 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 5 | 1 |
| MS35241-34 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| 20507-7 | 99551 | Goodrich Corporation Dba Goodrich Corp | 5 | 1 |
General Motors Corp Delco Remy Div
CAGE 16764Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems
CAGE 19315General Motors Corp
CAGE 24617Ontic Engineering & Manufacturing, Inc Dba Ontic Us
CAGE 45934Donallco Inc
CAGE 56705Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906Goodrich Corporation Dba Goodrich Corp
CAGE 99551DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.257 INCHES MINIMUM AND 0.279 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC ALL MATERIAL RESPONSES |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL C FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | I TYPE AND 2S STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
General Motors Corp Delco Remy Div
CAGE 16764
Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems
CAGE 19315
General Motors Corp
CAGE 24617
Ontic Engineering & Manufacturing, Inc Dba Ontic Us
CAGE 45934
Donallco Inc
CAGE 56705
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
Goodrich Corporation Dba Goodrich Corp
CAGE 99551
About NSN 5305-00-013-3418
NSN 5305-00-013-3418 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 8 part numbers associated with this NSN from 8 manufacturers.
To find the part number for NSN 5305-00-013-3418, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.