5305-00-010-1024
Screw,Machine
8 parts / 8 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 101024 | 18876 | Us Army Aviation and Missile Command | 3 | 2 |
| 20507-4 | 19315 | Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems | 5 | 9 |
| 101024 | 24617 | General Motors Corp | 5 | 9 |
| MS832X8C | 63734 | Kaitlin Corp | 5 | 9 |
| X10808 | 72264 | Angus Electronics Co Sub of Esterline Corp | 5 | 9 |
| 101024 | 7X677 | General Motors Llc Dba General Motors Llc | 3 | 2 |
| FFS92 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
| 20507-4 | 99551 | Goodrich Corporation Dba Goodrich Corp | 3 | 2 |
Us Army Aviation and Missile Command
CAGE 18876Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems
CAGE 19315General Motors Corp
CAGE 24617Kaitlin Corp
CAGE 63734Angus Electronics Co Sub of Esterline Corp
CAGE 72264General Motors Llc Dba General Motors Llc
CAGE 7X677Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348Goodrich Corporation Dba Goodrich Corp
CAGE 99551DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.400 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 0.500 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | COPPER ALLOY |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2S STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Us Army Aviation and Missile Command
CAGE 18876
Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems
CAGE 19315
General Motors Corp
CAGE 24617
Kaitlin Corp
CAGE 63734
Angus Electronics Co Sub of Esterline Corp
CAGE 72264
General Motors Llc Dba General Motors Llc
CAGE 7X677
Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348
Goodrich Corporation Dba Goodrich Corp
CAGE 99551
About NSN 5305-00-010-1024
NSN 5305-00-010-1024 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 8 part numbers associated with this NSN from 8 manufacturers.
To find the part number for NSN 5305-00-010-1024, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.