5305-00-010-0876
Screw,Machine
3 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 12Z1138-183 | 10001 | Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier | 3 | 2 |
| 12Z8PC65 | 10001 | Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier | 3 | 2 |
| FFS92 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
Navair and Navsea Managed Original Design Activity Dwg Not Material/Parts Supplier
CAGE 10001Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | 1.348 INCHES MINIMUM |
| AASB | FASTENER LENGTH | 1.500 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5305-00-010-0876
NSN 5305-00-010-0876 is a National Stock Number assigned to Screw,Machine. This NSN part number belongs to Federal Supply Class 5305 (SCREWS) under Federal Supply Group 53 (HARDWARE AND ABRASIVES). There are 3 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5305-00-010-0876, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.