5136-00-187-8025
Tap,Thread Cutting
3 parts / 3 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 50250BTYPE1 | 80049 | Department of the Air Force | 3 | 9 |
| GGG-T-70 TY1SEDSTA | 80244 | General Services Administration Federal Supply Service | 5 | 1 |
| GGG-T-70 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
Department of the Air Force
CAGE 80049General Services Administration Federal Supply Service
CAGE 80244Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJE | THREAD PITCH DIAMETERS | +1.5894 TO 1.5909 INCHES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 1.302 INCHES MINIMUM AND 1.305 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 1.302 INCHES MINIMUM AND 1.305 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 4.938 INCHES MINIMUM AND 5.062 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 4.938 INCHES MINIMUM AND 5.062 INCHES MAXIMUM |
| ABRY | LENGTH | 1.063 INCHES MINIMUM AND 1.187 INCHES MAXIMUM SQUARE END |
| ABRY | LENGTH | 1.063 INCHES MINIMUM AND 1.187 INCHES MAXIMUM SQUARE END |
| ALAR | FLUTE QUANTITY | 8 |
| ALAR | FLUTE QUANTITY | 8 |
| ANMJ | THREAD STRUCTURE | REGULAR |
| ANMJ | THREAD STRUCTURE | REGULAR |
| ANMM | THREAD FORMING METHOD | GROUND |
| ANMP | STARTING CHAMFER TYPE | TAPER |
| ANMP | STARTING CHAMFER TYPE | TAPER |
| ASDB | WIDTH ACROSS FLATS | 0.971 INCHES MINIMUM AND 0.979 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.971 INCHES MINIMUM AND 0.979 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | STRAIGHT FLUTE |
| STYL | STYLE DESIGNATOR | STRAIGHT FLUTE |
| THDS | THREAD SIZE AND SERIES/TYPE DESIGNATOR | 1.625-18 UNEF |
| THDS | THREAD SIZE AND SERIES/TYPE DESIGNATOR | 1.625-18 UNEF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND D SERIES AND A STYLE |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND D SERIES AND A STYLE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5136-00-187-8025
NSN 5136-00-187-8025 is a National Stock Number assigned to Tap,Thread Cutting. This NSN part number belongs to Federal Supply Class 5136 (TAPS, DIES, AND COLLETS; HAND AND MACHINE) under Federal Supply Group 51 (HAND TOOLS). There are 3 part numbers associated with this NSN from 3 manufacturers.
To find the part number for NSN 5136-00-187-8025, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.