5133-01-102-2894
Drill,Twist
2 parts / 2 mfrs
Precision Twist Drill Co
CAGE 16568National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
CAGE 80205DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.191 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED W/HEX NUT |
| ABHP | OVERALL LENGTH | 1.250 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| AKZH | CUTTING END STYLE | GENERAL PURPOSE |
| AKZL | NOMINAL CUTTING DIAMETER | 0.1910 INCHES |
| AKZV | CUTTING ROTATION DIRECTION | RIGHT-HAND |
| ALAA | FLUTE LENGTH | 0.562 INCHES NOMINAL |
| ALAR | FLUTE QUANTITY | 2 |
| BBDT | POINT TYPE | SPLIT |
| CQFM | HARDNESS RATING | 66.0 ROCKWELL C MINIMUM AND 67.5 ROCKWELL C MAXIMUM |
| CQRN | THREAD QUANTITY | 28 PER INCH |
| CSKR | POINT ANGLE | 135.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP M42 CUTTER |
| SFTT | SURFACE TREATMENT | OXIDE FILM CUTTER |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS965 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | D TYPE AND 11 NUMBER AND SHORT LENGTH AND -42 MATERIAL |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5133-01-102-2894
NSN 5133-01-102-2894 is a National Stock Number assigned to Drill,Twist. This NSN part number belongs to Federal Supply Class 5133 (DRILL BITS, COUNTERBORES, AND COUNTERSINKS: HAND AND MACHINE) under Federal Supply Group 51 (HAND TOOLS). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5133-01-102-2894, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.