5133-00-203-6536
Bit,Auger
2 parts / 2 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| GGG-B-383 TY1CLC | 80244 | General Services Administration Federal Supply Service | 5 | 1 |
| GGG-B-383 | 81348 | Federal Specifications Promulgated By General Services Administration Washington Dc | 4 | 1 |
General Services Administration Federal Supply Service
CAGE 80244Federal Specifications Promulgated By General Services Administration Washington Dc
CAGE 81348DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAZF | SHANK STYLE | TAPER-SQUARE |
| ABHP | OVERALL LENGTH | 15.750 INCHES MINIMUM |
| AKZH | CUTTING END STYLE | HOLLOW CENTER SINGLE TWIST W/SCREW POINT |
| AKZL | NOMINAL CUTTING DIAMETER | 0.6875 INCHES |
| AKZY | TWIST LENGTH | 12.000 INCHES MINIMUM |
| ALAF | SHANK LARGE END SQUARE WIDTH | 0.375 INCHES NOMINAL |
| ALAH | SHANK SMALL END SQUARE WIDTH | 0.218 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| TEST | TEST DATA DOCUMENT | 81348-GGGB383 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | C CLASS AND 1 TYPE |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 5133-00-203-6536
NSN 5133-00-203-6536 is a National Stock Number assigned to Bit,Auger. This NSN part number belongs to Federal Supply Class 5133 (DRILL BITS, COUNTERBORES, AND COUNTERSINKS: HAND AND MACHINE) under Federal Supply Group 51 (HAND TOOLS). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 5133-00-203-6536, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.