NSN
4720-01-507-2104
Hose Assembly,Nonmetallic
FSC 4720 — HOSE AND FLEXIBLE TUBINGFSG 47 — PIPE, TUBING, HOSE, AND FITTINGS
2 parts / 2 mfrs
Part Numbers for NSN 4720-01-507-21042 records
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MIL-DTL-25579 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| MS8005B317C | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
Manufacturers (2)
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906Identification Data
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
A
Item Characteristics
| MRC | Requirement | Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3A SECOND END |
| AAJD | THREAD CLASS | 3A FIRST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND SECOND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| AARX | INSIDE DIAMETER | 0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| ABJH | TEMP RATING | 450.0 FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.304 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE SECOND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT FIRST END |
| AKUU | END CONNECTION DESIGN | ELBOW SECOND END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE FIRST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CMLP | THREAD QUANTITY PER INCH | 24 SECOND END |
| CMLP | THREAD QUANTITY PER INCH | 24 FIRST END |
| CQBD | BURST TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES SECOND END |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES FIRST END |
| CQQF | OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| CQRB | SEAT ANGLE | 37.0 DEGREES FIRST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES SECOND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES SECOND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 31.875 INCHES NOMINAL WORKING |
| CWDW | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.3115 INCHES SECOND END |
| CWDW | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.3115 INCHES FIRST END |
| CWFD | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.3235 INCHES SECOND END |
| CWFD | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.3235 INCHES FIRST END |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY PERMANENTLY ATTACHED FITTINGS, TETRAFLUOROETHYLENE HIGH TEMPERATURE MEDIUM PRESSURE, FLARE TO FLARE |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, TETRAFLUOROETHYLENE |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| TEST | TEST DATA DOCUMENT | 96906-MS8005 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND B81349-MIL-H-27267 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND B81349-MIL-F-27272 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) SECOND END |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS8005 GOVERNMENT STANDARD |
Related NSNs in FSC 4720
4720-01-508-7205— Hose Assembly,Nonmetallic4720-00-600-8264— Hose Assembly,Nonmetallic4720-01-517-2335— Hose Assembly,Nonmetallic4720-01-493-9038— Hose Assembly,Nonmetallic4720-01-717-4529— Hose Assembly,Metallic4720-01-652-9309— Hose Assembly,Nonmetallic4720-00-949-0544— Hose Assembly,Nonmetallic4720-01-188-1580— Hose,Preformed4720-00-355-19784720-01-727-5322— Tubing,Nonmetallic
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
NSN4720-01-507-2104
NIIN015072104
FSC4720
DEMILA
PARTS2
MFRS2
Manufacturers
About NSN 4720-01-507-2104
NSN 4720-01-507-2104 is a National Stock Number assigned to Hose Assembly,Nonmetallic. This NSN part number belongs to Federal Supply Class 4720 (HOSE AND FLEXIBLE TUBING) under Federal Supply Group 47 (PIPE, TUBING, HOSE, AND FITTINGS). There are 2 part numbers associated with this NSN from 2 manufacturers.
To find the part number for NSN 4720-01-507-2104, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.