4720-01-466-2476
Hose Assembly,Nonmetallic
Unit Price
$150.89
per EA
2 parts / 1 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 12C12M-12FL45-1 | 24161 | Gates Corporation | C | 1 |
| 12C12M-12FL45-12FJX-111"LG | 24161 | Gates Corporation | 3 | 2 |
Gates Corporation
CAGE 24161| Effective Date | Unit Price | UI | SLC |
|---|---|---|---|
| 01-OCT-2025 | $150.89 | EA | 0 |
DEMIL
A
HMIC
N
PMIC
A
ESD/EMI
A
| MRC | Requirement | Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B FIRST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.750 INCHES NOMINAL SECOND END |
| ABKV | OUTSIDE DIAMETER | 1.210 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.500 INCHES |
| ADJS | EXTERIOR COLOR | BLACK |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 0.875 INCHES NOMINAL SECOND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.000 INCHES NOMINAL SECOND END |
| AECS | BOLT HOLE QUANTITY | 4 SECOND END |
| AFQN | FLANGE LENGTH | 2.550 INCHES NOMINAL SECOND END |
| AGFF | FLANGE WIDTH | 1.880 INCHES NOMINAL SECOND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE FIRST END |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL W/ GASKET GROOVE SECOND END |
| AHNX | BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL SECOND END |
| AKUT | END FLANGE CONSTRUCTION | SPLIT SECOND END |
| AKUU | END CONNECTION DESIGN | ELBOW SECOND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT FIRST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE SECOND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CMLP | THREAD QUANTITY PER INCH | 12 FIRST END |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND 5TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER |
| CQJX | NOMINAL THREAD SIZE | 1.063 INCHES FIRST END |
| CQQF | OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| CQRB | SEAT ANGLE | 37.0 DEGREES FIRST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES SECOND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | WEATHERPROOF AND OIL RESISTANT AND OZONE RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 111.000 INCHES NOMINAL OVERALL |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) SECOND END |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UN FIRST END |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 4720-01-466-2476
NSN 4720-01-466-2476 is a National Stock Number assigned to Hose Assembly,Nonmetallic. This NSN part number belongs to Federal Supply Class 4720 (HOSE AND FLEXIBLE TUBING) under Federal Supply Group 47 (PIPE, TUBING, HOSE, AND FITTINGS). There are 2 part numbers associated with this NSN from 1 manufacturer.
The current government unit price for NSN 4720-01-466-2476 is $150.89.
To find the part number for NSN 4720-01-466-2476, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.