4720-00-882-8909
Hose Assembly,Nonmetallic
4 parts / 4 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| 10911122-1 | 19207 | U S Army Tank Automotive Command Amsta-Im-Mm | 5 | 2 |
| 30RB2MS4MS15 | 63906 | Contitech Usa, Inc. | 5 | 9 |
| 30RB2MS4MS15 | 70434 | Anchor Swan Corp Sub of Amerace Corp | 5 | 9 |
| MILH13531ATYPE1 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
U S Army Tank Automotive Command Amsta-Im-Mm
CAGE 19207Contitech Usa, Inc.
CAGE 63906Anchor Swan Corp Sub of Amerace Corp
CAGE 70434Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND SECOND END |
| AARX | INSIDE DIAMETER | 0.188 INCHES NOMINAL |
| ABJH | TEMP RATING | -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| AHNC | CONNECTION STYLE | INVERTED FLARE SECOND END |
| AHNC | CONNECTION STYLE | INVERTED FLARE FIRST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT SECOND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT FIRST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE FIRST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE SECOND END |
| CMLP | THREAD QUANTITY PER INCH | 18 FIRST END |
| CMLP | THREAD QUANTITY PER INCH | 27 SECOND END |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER |
| CQJX | NOMINAL THREAD SIZE | 0.125 INCHES SECOND END |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES FIRST END |
| CQQF | OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| CQRB | SEAT ANGLE | 30.0 DEGREES SECOND END |
| CQRB | SEAT ANGLE | 30.0 DEGREES FIRST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 15.000 INCHES NOMINAL OVERALL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | NPTF SECOND END |
| THSD | THREAD SERIES DESIGNATOR | NPT FIRST END |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
About NSN 4720-00-882-8909
NSN 4720-00-882-8909 is a National Stock Number assigned to Hose Assembly,Nonmetallic. This NSN part number belongs to Federal Supply Class 4720 (HOSE AND FLEXIBLE TUBING) under Federal Supply Group 47 (PIPE, TUBING, HOSE, AND FITTINGS). There are 4 part numbers associated with this NSN from 4 manufacturers.
To find the part number for NSN 4720-00-882-8909, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.