4720-00-554-7980
Hose Assembly,Nonmetallic
6 parts / 5 mfrs
| Part Number | CAGE | Manufacturer | RNCC | RNVC |
|---|---|---|---|---|
| MS28759E0170 | 14798 | Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company | 5 | 9 |
| MS28759E0170 | 32142 | Hydrasearch Company, Llc | 5 | 1 |
| MIL-DTL-8790 | 81349 | Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M | 4 | 1 |
| AN6292-4-17 | 88044 | Aeronautical Standards Group Dept of Navy and Air Force | 5 | 9 |
| MS28759-40170 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 2 | 2 |
| MS28759E0170 | 96906 | Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M | 5 | 9 |
Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company
CAGE 14798Hydrasearch Company, Llc
CAGE 32142Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906DEMIL
A
HMIC
N
PMIC
U
ESD/EMI
| MRC | Requirement | Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B FIRST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| AARX | INSIDE DIAMETER | 0.212 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.625 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT FIRST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES FIRST END |
| CQQF | OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| CQRB | SEAT ANGLE | 37.0 DEGREES FIRST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 17.000 INCHES NOMINAL WORKING |
| MEDA | MEDIA FOR WHICH DESIGNED | AIR AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF FIRST END |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS28759 GOVERNMENT STANDARD |
Need full procurement data, packaging, and standardization info?
View Complete NSN Data on NSN LookupQuick Reference
Designed Metal Connections Inc Dba Permaswage Usa Div Permaswage, a Pcc Company
CAGE 14798
Hydrasearch Company, Llc
CAGE 32142
Military Specifications Promulgated By Military Departments/Agencies Under Authority of Defense Standardization Manual 4120 3-M
CAGE 81349
Aeronautical Standards Group Dept of Navy and Air Force
CAGE 88044
Military Standards Promulgated By Military Departments Under Authority of Defense Standardization Manual 4120 3-M
CAGE 96906
About NSN 4720-00-554-7980
NSN 4720-00-554-7980 is a National Stock Number assigned to Hose Assembly,Nonmetallic. This NSN part number belongs to Federal Supply Class 4720 (HOSE AND FLEXIBLE TUBING) under Federal Supply Group 47 (PIPE, TUBING, HOSE, AND FITTINGS). There are 6 part numbers associated with this NSN from 5 manufacturers.
To find the part number for NSN 4720-00-554-7980, refer to the part number cross-reference table above. Each part number is linked to its manufacturer through a CAGE (Commercial and Government Entity) code.